Continuous Polling - Toshiba e-studio 16 Operator's Manual

8. POLLING COMMUNICATIONS (Cont.)
This section describes the procedure to poll the same remote FAX(es) on a regular schedule. Continuous
Polling operations can be programmed for specific time intervals on the days selected.
• A 4-digit security code can be used with other TOSHIBA MODEL facsimiles when the document has a
security code programmed.
• Calls are performed within the set time period on the days selected with the set interval between
callings.
• If multiple sending stations are programmed, callings are performed to all those stations within the set
time period.
3
• If the polling operation exceeds the set time period, it will continue until all the facsimiles have been
polled.
• Redialing or calling to alternate dialing numbers is not available during this operation.
• If a power failure occurs during this procedure, the polling continues when power is restored.
• If the set time period is shorter than the set calling interval, polling will be performed only once at the
start time.
1 Press the
2 Display the POLLING Menu and select PROG. CONT.
POLL.
Press:
3
To select "6. INTERVAL," press
• Set the interval using the
key.
4 To select "3. START," press
• Set the date and time and press the
• Using the
• Using the
• The time format varies according to whether the 12-hour
clock or 24-hour clock is selected. (Refer to the Operator´s
Manual (For Copying Functions).)
5
To select "5. DURATION," press
• Select the duration period and press the
• Using the
• Using the
• End time is automatically calculated.
3-28
HANDY FEATURES

Continuous Polling

key.
then
or
.
or key to select the set item.
or key to select the setting value.
or key to select the set item.
or key to select the setting value.
PROG.CONT.POLL
1.CLEAR CURRENT SETTINGS
2.ENTER TEL NUMBER(S)
3.START
.
PROG.CONT.POLL.
INTERVAL
key and press the
BETWEEN CALL
PROG.CONT.POLL.
START DATE & TIME
key.
.
PROG.CONT.POLL.
DURATION
key.
:MON 08:00AM
70MIN
10
10MIN
MON 08:00 AM
09:00