Memory Tx - Toshiba e-studio 16 Operator's Manual

• Make sure that memory TX is set as the transmission mode in the PROGRAM menu. (
4-26.)
• The factory setting is memory TX.
1 Press the key.
2 Place the original.
• For details on how to place originals on the original glass.
( See page 2-8.)
3 Set the scanning conditions. (
2-15.)
4 Dial the remote FAX number. (
2-21.)
• Abbreviated Dialing ......
• Alphabet Dialing ...........
• Group Dialing ...............
• One Touch Dialing ........
5
Press the key.
The original starts to be scanned and is stored to memory.
Tip
• Transmitted-records are automatically printed out if any job
fails to transmit (default "On Error").
• Canceling Transmission (

Memory TX

See pages 2-10 to
See pages 2-16 to
See page 2-18.
See page 2-19.
See page 2-20.
See page 2-21.
See page 2-31.)
See page
2
2-23