8.SPECIFICATIONS
Automatic Document Feeder
Copy sides
Number of originals (A4)
Feeding speed
Acceptable originals
Paper weight
Power source
Dimensions
Weight
Power consumption
These specifications vary depending on the copying conditions and the environment.
Specifications and appearance are subject to change without notice in the interest of product improvement.
Continuous copying speed
The values below are measured when originals are set on the original glass, 100% and nonsort multiple copies are made.
Paper size
A4, A5-R, B5, LT, ST-R
A4-R, B5-R, LT-R
B4, FOLIO, LG, COMP
A3, LD
A3 and LD
*
can be loaded only on the bypass tray.
TOSHIBA-recommended paper is used for the values of the specifications above.
The bypass copying speed is as listed above when specifying the paper size.
This specification varies depending on the copying conditions and the environment.
1-side
2
50 originals (80 g/m
, 20 lb. Bond) or 9.5 mm or less in height (more than 80 g/m
20 sheets/min. (A4, LT)
A3, A4, A5-R, B4, B5, LG, LT, LD, ST-R, 8K, 16K
2
50 - 104 g/m
, 13 - 27 lb. Bond
Power supplied from the equipment
385 mm (15.16") (W) x 445 mm (17.52") (D) x 88 mm (3.46") (H)
Approx. 3.6 kg (7.9 lb)
40 W max.
Paper source
Drawer
Bypass tray
Drawer
Bypass tray
Drawer
Bypass tray
Drawer
Bypass tray
e-STUDIO2505H/e-STUDIO2505F Specifications
8 SPECIFICATIONS
sheets/min.
Copying speed
25
25
-
19
-
16
-*
14
2
, 20 lb. Bond)
145