Chain Dialing - Toshiba e-studio 16 Operator's Manual

9. CHAIN DIALING

This function allows you to dial telephone/facsimile numbers that may require many digits with pauses
for voice prompts or variations in number sequences such as long distance access codes, or specialized
access lines. You can combine sets of numbers (Abbreviated Dialing, Alphabet Dialing, One Touch
Dialing, and Keypad Dialing) by using the
1 Press the key.
2 Place the original.
• For details on how to place originals on the original glass.
( See page 2-8.)
3 Set the scanning conditions. (
2-15.)
4 Press the
5 Enter the Dial number.
Start constructing your dialing sequence using any of the
following dialing methods.
You may use them consecutively until your enter dialing string
has been entered.
After each entry sequence, the LCD screen displays the
screen shown is step 4.
• Abbreviated Dialing (
• Alphabet Dialing (
• One Touch Dialing (
• Keypad Dialing (
Remember to add pauses (if required) to allow for voice
prompts or other system delays. (
6 When all the required entries are performed, press
the key.
• The facsimile starts scanning the document into memory,
and automatically send document to the designated FAXes.
See pages 2-10 to
Key (on the Function key panel).
See page 2-18.)
See page 2-19.)
See page 2-21.)
See page 2-16.)
See page 2-17.)
Key.
CHAIN DIAL COMM.
ENTER TEL NUMBER OR,
PRESS SPEED DIAL KEY
OR ONE TOUCH KEY
TELEPHONE NUMBERS LIST
1.ABB. NUMBER
2.SEARCH NAME
CHAIN DIAL COMM.
ABB.NUMBERS = (1-999)
CHAIN DIAL COMM.
ONE TOUCH KEY =
LONDON OFFICE
CHAIN DIAL COMM.
:12345
SCANNING TO MEMORY
JOB NUMBER
SCANNING PAGE
RESIDUAL MEMORY
3
01
: XXX
: YYY
: ZZZ%
3-31