Before Setting Up Your Projector; Description Of The Touch Panel Sections - NEC NC2500S DLP CInema Installation Manual

Touch Panel
1.2

Description of the Touch Panel Sections

Front of Touch Panel
1
1
LCD panel
A touch panel screen.
2
Shield button
Button that temporarily disables operations from the touch panel screen,
Press again to enable operations.
3
External control terminal (RS-232C)
This is not used with this Controller.
4
LAN port (LAN) (RJ-45)
Use a LAN cable (Ethernet cable) to connect the controller with the projector.
5
External control terminal (RS-232C) (Bayonet-locking)
This is not used with this Controller.
6
USB port (Type A)
This is not used with this controller.
7
DC IN terminal (DC power input terminal)
A power terminal. Ask the service personnel to connect the power cord.
8
Power ON/OFF switch
The main power switch of this controller. The power of the controller is linked with the
power for the projector.
9
Holder arm mounting hole
Mount the controller to the projector using a bracket and these holes.
2

1. Before Setting Up Your Projector

Rear of Touch Panel (down ward)
COM LAN RS-485 USB
3 4 5 6
POWER
OFF ON
7 8 9
B-7