Top Cover Mounting Procedure; Side Cover Removal & Mounting; The Projector - NEC NC2500S DLP CInema Installation Manual

NC2500S
1.5.2

Top cover mounting procedure

Place the top rear cover of
[1]
the projector once on the
top of the projector.
Place it at a position where the cables
from rear status indicators can be
connected.
Connect the cables for rear
[2]
status indicator.
Before mounting the top rear cover, it is
necessary to connect the cables.
<1> Pass the cables through the
clamp of the projector.
<2> Connect the cables to the
Mount the top front cover of
[3]

the projector.

Mount the top rear cover using the
hexagonal fasteners at the top (2
places).
Mount the top rear cover.
[4]
Mount the top front cover using the
hexagonal fasteners at the top (4 places).
1.5.3 Side cover removal & mounting
Side cover removal procedure
Remove the side covers (side front cover, side rear cover and lens side cover) by removing
the hexagonal fasteners (2 places) at the bottom of covers and pulling down the covers.
Side cover mounting procedure
Insert the covers to the top of the cover mounting positions and mount them using
hexagonal fasteners (2 places) at the bottom of covers.
A-18
connector of the board
(Connector name: POSTA).
1. Before Setting Up Your Projector
POSTA