3.
Setting Up Your
Projector
This chapter describes how to initialize the projector using the Digital Cinema Communicator
(DCC) for the touch panel.
See "4.1. List of Menu Items"(Page.42) Using the menu (Menu Descriptions & Functions)"
MEMO
for information about the various functions.
3.1
Starting/Exiting the Software
The touch panel power works together with the projector. When you turn on the main power
to your projector, it enters standby mode and the software automatically starts. Turning off
the main power to the projector causes the software to automatically exit.
3.2
Following Setup
●STEP1
Adjusting Colors
●STEP2
Creating "MCGD" Data
●STEP3
Adjusting the Lens and the Brightness of the Lamp
●STEP4
Creating New Titles
B-14