Before Setting Up Your Projector; Clearance For Installing The Projector (English) - NEC DLP Cinema NC3541L Installation Manual

Hide thumbs Also See for DLP Cinema NC3541L:

Table of Contents

1. Before Setting Up Your Projector

Allow ample clearance between the projector and its surroundings as shown below.

Avoid installing the projector in a place where air movement from the HVAC is directed at the projector.

Heated air from the HVAC can be taken in by the projector's intake vent. If this happens, the temperature inside the projector

will rise too high causing the over-temperature protector to automatically turn off the projectors power.

Example 1 – If there are walls on both sides of the projector.

The drawing shows the proper clearance required for the front, back and top of the projector.

NOTE

Example 2 – If there is a wall behind the projector.

(1) For floor installation:

The drawing shows the proper clearance required for the front, sides and top of the projector.

NOTE

60cm/12"

or greater

70cm/27.6"

or greater

60cm/12"

or greater

Lens

Table of Contents

Dlp cinema nc2041l