Touch Panel
2.2
Connecting the Power Cord and LAN Cable
Connect the power cord and LAN cable to the projector head.
Outline
It is an example for the installation on the front of the projector/lens.
Clamp (2places)
Using the bushing supplied with the holder arm, pass the power cord and LAN cable through
the hole in the holder arm to the projector head.
Route the cable to the projector by passing it through the clamp and frame in the projector,
taking care not to let the cable come into contact with the PC boards and lens mechanism.
Steps for connecting the LAN cable and power cord to the projector are given below.
[1]
Pass the power cord and LAN
cable through the cable hole
in the holder arm and then
install the supplied bushing.
DC power output
(POPSS2)
LAN port
LAN cable
(LAN port)
PS code
(DC IN terminal)
bush
2. Setting Up & Connections
Holder arm
B-11