Installation - NEC NC2500S DLP CInema Installation Manual

NC2500S
• Even if the buttons on the projector's control panel are locked, remote controller buttons
Note
are available.
• When the buttons on the projector's control panel are locked, press the CANCEL button on
the projector for about 10 sec. to unlock them (The key lock setting on the projector
becomes Unlock).
GPIO Port
When controlling the projector from the external control terminal (GPI/O), select the subject
of GPI/O port control. With the control subject set to "Cinema Only", the projector does not
accept commands issued using the control panel buttons, remote controller or personal
computer.
Cinema Only
System/Cinema
FactoryDefault
Used to select factory default values for the projector settings.
M Key & Title
All
• Files previously deleted or rewritten cannot be restored.
Note
4.3.3

Installation

Image Orient
Make a selection according to the setup position of your projector and screen.
A-52
← Displays the currently selected item with asterisk (*).
← Displays the setting
To restrict the subject of control from the external control terminal
(GPI/O) to the Cinema board only
To restrict the subject of control from the external control terminal
(GPI/O) to the System board and the Cinema board
← Select the item to be reset.
← Press the ENTER button to execute resetting.
Titles are set to factory default ones. (Tiles you have created are
deleted, but files are not.)
All the settings of your projector are set to factory default values except
for files.
4. LCD Menu