nifty Heightrider HR17 SP50 HYBRID SERIES 4x4 Operating/Safety Instructions Manual page 31

4.3.3 WARNING ICONS
Advisory
Safety Critical
Note: If a Safety Critical condition (red flashing triangle) has been detected, the safety warning lamp
(see Section 4.3.1, Item 10) on the Platform Control Panel will also illuminate.
English/USA – 03/10
Original instructions
High Speed Drive Available : Machine can be driven at its maximum speed if
ground and evironmental conditions are suitable and it is safe to proceed.
High Water Temperature : Check engine coolant level. Caution, the cooling
system is pressurised, so allow engine to cool sufficiently before removing
filler cap.
Low Oil pressure : If illuminated during machine operation, check engine oil
level. Top up if necessary.
Safe Working Load exceeded:- The Maximum SWL (225kg/500lbs) has
been exceeded. Immediately remove any unnecessary items from the platform
in a safe manner to restore machine functions.
Alternatively, the platform may have come into contact with a fixed object, see
Section 5.3 for recovery procedure.
MAX tilt angle exceeded:- Lower booms into stowed position and drive onto
level ground to fully restore machine operation.
Height Rider/SP Series
Operating & Safety Instructions
29