Ref. No. 3
HOW TO REMOVE THE THERMAL HEAD
Procedure
3
1) Push the COVER OPEN BUTTON
to open the operation panel.
2) Remove the 2 screws
3) Remove the ANGLE.
4) Disconnect the CONNECTOR.
5) Remove the thermal head ass'y.
6) Remove the 3 screws
7) Remove the 2 GUIDEs and the PLATE.
8) Remove the 3 SPRINGs.
9) Remove the THERMAL HEAD.
B
COVER OPEN BUTTON
.
A
.
B
A
A
GUIDE
PLATE
B
Thermal Head Ass'y Parts Installation (1)
OK
NG
View (D)
OK
NG
Set the GUIDE in the THERMAL
HEAD correctly.
ANGLE
THERMAL
HEAD
CONNECTOR
GUIDE
SPRING
Thermal Head Ass'y Parts Installation (2)
View (E)
View (E)
OK
NG
Make sure that the spring is fitted properly.
105
View (C)
OK
NG
Do not leave space between
the PLATE and the THERMAL
HEAD.
View (C)
View (D)
B
Do not let the lead pass
over the rib.
Rib
KX-FP101AL