Panasonic KX-FP101AL Service Manual page 104

KX-FP101AL
Ref. No. 2 HOW TO REMOVE THE OPERATION PANEL BLOCK
Procedure
1 2
1) Unhook all the connectors connecting
the main cabinet with the OPERATION
PANEL BLOCK.
2) Push the COVER OPEN BUTTON to open
the OPERATION PANEL BLOCK.
3) Tilt the unit vertically so that its left side faces
on a flat surface like a table. While holding
down the grey-shaded ARM as illustrated in
Fig. A 1 , insert a screwdriver and unlatch
the ARM as illustrated in Fig. A
4) Pull out both sides of the arms (in the direction of
the arrow shown in Fig. B).
5) Remove the OPERATION PANEL BLOCK.
OPERATION PANEL BLOCK
Taping Position
View (B)
OK
OPERATION PANEL
BLOCK
2 .
OPERATION PANEL
BLOCK
Fig. A
Bend two bunches of harnesses
in parallel.
OK
NG
OPENING
NG
Do not let harnesses overlap
each other.
View (B)
NG
Slack
Tie harnesses to the ARM with
tape tightly without making a slack.
ARM
Fig. B
Be sure not to let harnesses
get caught between the COVER
and the cabinet during the instal-
lation.
104
CUTOUT
Do not let harnesses hang over
the CUTOUT and the OPENING.
COVER OPEN
BUTTON
Fig. B