Rotate the tool anti-clockwise and the
screwdriver will activate in the reverse
Note: The speed of the tool is determined by
the amount of rotation. .
Small rotation = slower speed.
Large rotation = Higher speed.
LED work light
The LED work light (4) is activated automati-
cally when the motion control activator (1) is
Automatic shut off
To maintain battery life in case off accidental
activation, the tool will automatically turn off
after 45 seconds of continuous opperation.
The LED work light (4) will blink rapidly for 5
seconds before the tool shuts down.
Hints for optimum use
Always use the correct type and size of
If screws are difficult to tighten, try apply-
ing a small amount of washing liquid or
soap as a lubricant.
Always hold the tool and screwdriver bit in
a straight line with the screw.
Your Black & Decker tool has been designed
to operate over a long period of time with
a minimum of maintenance. Continuous
satisfactory operation depends upon proper
tool care and regular cleaning.
Your charger does not require any mainte-
nance apart from regular cleaning.
Warning! Before performing any maintenance
on the tool, remove the battery from the tool.
Unplug the charger before cleaning it.
Regularly clean the ventilation slots in
your tool and charger using a soft brush or
Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
Regularly open the chuck and tap it to
remove any dust from the interior.
Protecting the environment
Separate collection. This product
must not be disposed of with
normal household waste.
Should you find one day that your Black &
Decker product needs replacement, or if it
is of no further use to you, do not dispose of
it with household waste. Make this product
available for separate collection.