Download Print this page

Residual Risks; Safety Of Others - Black & Decker BDCS36G Original Instructions Manual

Hide thumbs

Advertisement

ENGLISH
Hold power tool by insulated gripping
u
surfaces when performing an operation
where the fastener may contact hidden
wiring. Fasteners contacting a "live" wire
may make exposed metal parts of the
power tool "live" and could give the opera-
tor an electric shock.
Use clamps or another practical way
u
to secure and support the workpiece
to a stable platform. Holding the work
by hand or against your body leaves it
unstable and may lead to loss of control.
This tool is not intended for use by
u
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or in-
struction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.

Safety of others

This appliance is not intended for use by
u
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or in-
struction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
u
that they do not play with the appliance.
6
(Original instructions)

Residual risks.

Additional residual risks may arise when using
the tool which may not be included in the
enclosed safety warnings. These risks can
arise from misuse, prolonged use etc.
Even with the application of the relevant
safety regulations and the implementation of
safety devices, certain residual risks can not
be avoided. These include:
Injuries caused by touching any rotating/
u
moving parts.
Injuries caused when changing any parts,
u
blades or accessories.
Injuries caused by prolonged use of a tool.
u
When using any tool for prolonged periods
ensure you take regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing dust
u
developed when using your tool (exam-
ple:- working with wood, especially oak,
beech and MDF.)
Vibration
The declared vibration emission values stated
in the technical data and the declaration of
conformity have been measured in accord-
ance with a standard test method provided
by EN 60745 and may be used for comparing
one tool with another. The declared vibration
emission value may also be used in a prelimi-
nary assessment of exposure.

Hide quick links:

Advertisement

loading

  Also See for Black & Decker BDCS36G

This manual is also suitable for:

Bdcs361Bdcs36g-xe