Additional Safety Instructions For Bat- Teries And Chargers - Black & Decker BDCS36G Original Instructions Manual

Warning! The vibration emission value during
actual use of the power tool can differ from
the declared value depending on the ways in
which the tool is used. The vibration level may
increase above the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly using
power tools in employment, an estimation of
vibration exposure should consider, the actual
conditions of use and the way the tool is used,
including taking account of all parts of the
operating cycle such as the times when the
tool is switched off and when it is running idle
in addition to the trigger time.
Labels on tool
The following symbols are shown on the tool:
:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Additional safety instructions for bat-
teries and chargers
Batteries
Never attempt to open for any reason.
u
Do not expose the battery to water.
u
Do not store in locations where the
u
temperature may exceed 40 °C.
Charge only at ambient temperatures
u
between 10 °C and 40 °C.
(Original instructions)
Charge only using the charger provided
u
with the tool.
When disposing of batteries, follow the
u
instructions given in the section "Protect-
ing the environment".
p
Do not attempt to charge dam-
aged batteries.
Chargers
Use your Black & Decker charger only to
u
charge the battery in the tool with which it
was supplied. Other batteries could burst,
causing personal injury and damage.
Never attempt to charge non-rechargea-
u
ble batteries.
Have defective cords replaced immedi-
u
ately.
Do not expose the charger to water.
u
Do not open the charger.
u
Do not probe the charger.
u
$
The charger is intended for
indoor use only.
Read the instruction manual
before use.
ENGLISH
7