Download  Print this page

Black & Decker BDCS40G Instruction Manual

Motion sensing screwdriver
Hide thumbs

Advertisement

MOTION SENSING SCREWDRIVER

INSTRUCTION MANUAL

Catalog Number BDCS40G
Thank you for choosing Black & Decker! Go to
www.BlackandDecker.com/NewOwner
PLEASE READ BEFORE RETURNING
THIS PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your
WWW.BLACKANDDECKER.COM/INSTANTANSWERS
If you canʼt find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
to register your new product.
Black & Decker purchase, go to
for instant answers 24 hours a day.
to speak with an agent.

Advertisement

loading

  Also See for Black & Decker BDCS40G

  Summary of Contents for Black & Decker BDCS40G

  • Page 1: Instruction Manual

    MOTION SENSING SCREWDRIVER INSTRUCTION MANUAL Catalog Number BDCS40G Thank you for choosing Black & Decker! Go to www.BlackandDecker.com/NewOwner to register your new product. PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON: If you have a question or experience a problem with your Black &...
  • Page 2: Safety Guidelines - Definitions

    SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
  • Page 3: Specific Safety Rules

    d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
  • Page 4 WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of • lead from lead-based paints, these chemicals are: •...
  • Page 5: Functional Description

    FUNCTIONAL DESCRIPTION 1) HEX SPINDLE 2.) SCREWDRIVER BIT 3.) LED LIGHT 4.) MOTION CONTROL ACTIVATOR 5.) CHARGING PORT 6.) CHARGER 7.) CHARGER PLUG SAFETY WARNINGS AND INSTRUCTIONS: BATTERIES • Do not disassemble or open, drop (mechanical abuse), crush, bend or deform, puncture, or shred. •...
  • Page 6: Charging Procedure

    10. Do not attempt to open the charger. There are no customer serviceable parts inside. Return to any authorized Black & Decker service center. 11. DO NOT incinerate the tool or batteries even if they are severely damaged or completely worn out. The batteries can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned.
  • Page 7: Assembly And Adjustment

    c. Store tool in a location where the surrounding air temperature is approximately 40°F - 75°F (4.5°C - 24°C). d. Disconnect charger from tool after charge is complete. WARNING: Fire Hazard. When disconnecting the charger from the tool, be sure to unplug the charger from the outlet first, then disconnect the charger cord from the tool.
  • Page 8 VARIABLE SPEED • The spindle speed is dependent upon the speed that you rotate your hand. • The slower you rotate your hand, the slower the screwdriver turns. • The faster you rotate your hand, the faster the screwdriver turns. •...
  • Page 9: Troubleshooting

    TROUBLESHOOTING Problem Possible Cause Possible Solution • Battery will not charge. • Charger not plugged into • Plug charger into a a working outlet. working outlet. Refer to “Important Charging Notes” for more details. • Check current at receptacle by plugging in a lamp or other appliance.
  • Page 10 be made within the time period of the retailerʼs policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges. The second option is to take or send the product (prepaid) to a Black &...