Assembly
1) Tilt the rear section slightly back on the anti-tip wheel while combining the front & rear sections.
2) Please use the frame release lever to lift the front section as aligning and combining the frame hooks of the
front section with the lower frame tube.
3) Lower the front section completely once the frame hooks are over the lower frame tube, which will engage
the frame lock-up.
4) Raise the tiller and tighten the quick release lever completely.
5) Put the battery pack back properly.
6) Reinstall the seat and rotate it until it is secured into proper position.
Step 1
Step 4
Step 5
Step 2 & 3
Step 6
www.heartway.com.tw
Frame release lever
Lower frame tube
Frame hook
Step 4-1. Tighten the quick release lever
13