Aircraft Installation - Clek Foonf Instruction Manual

Step 4
Remove Seat Cushion Cover from Seat
Cushion, as shown in Figure 136.
TO INSTALL SEAT CUSHION COVER
Step 1
Place Seat Cushion Cover on a flat surface
with Seat Cushion Cover attachments facing
up, as shown in Figure 137.
Step 2
Place Seat Cushion onto Seat Cushion Cover,
aligning the Seat Cushion with the Seat
Cushion Cover attachments.
Step 3
Reattach Seat Cushion Cover attachments to
Seat Cushion by wrapping the Seat Cushion
Cover sides around the entire Seat Cushion,
as shown in Figure 138.
89
Figure 136
Figure 137
Figure 138
SEAT BACK COVER REMOVAL/INSTALLATION
Removal of the seat back cover is not recommended
unless necessary due to heavy soiling which cannot
be removed by surface washing. For instructions on
removal and installation of the seat back cover go to
http://www.clekinc.ca/support/foonf

Aircraft Installation

Clek strongly recommends that children are secured in their
child seat during airline travel.
FORWARD-FACING
To install this seat in an aircraft forward-facing, follow
the instructions for installing the seat with a lap belt in the
"Installing Forward-Facing Car Seat With Vehicle Belt" on
page 55.
IMPORTANT: Aircraft are not equipped with top tether
anchors. The Top Tether should be stored in the back of
the car seat and not used on an aircraft, see "Top Tether
Storage" on page 87.
90