Page 1
000011 Olli and Ozzi Instruction Manual This belt-positioning booster seat (booster seat) is designed for use by children who meet these requirements: 40–57 in. 40–120 lb. 4 years & up 101–145 cm. 18–54 kg. WARNING Failure to properly install or use this booster seat increases the risk of serious injury or death to the child and others in a sharp turn, sudden stop or crash.
Page 2
Limited Warranty ..................... Warranty Limitations ..................Limitation of Warranties and State/Provincial Law Rights ........® Clek and Clek logos, Olli, Ozzi, and Oobr are registered trademarks of Clek Inc. For a complete list of Clek Inc. trademarks please visit www.clekinc.com/trademarks.
™ 3 Armrests 4 comfort-cube ™ For concerns related to the parts, use or maintenance of this product, please contact us at: 5 Quick Release System Clek Inc. 6 Removable & washable seat cover Toronto, Ontario, Canada 7 drink-thingy ™* 8 Manual Release System www.clekinc.com...
Registering Your Booster Seat WARNING booster seat frame. Model Name: olli Clek Inc., Toronto, Ontario Canada Manufactured in: Serial No.: 81473500101 Child restraints could be recalled for safety reasons. You MUST register this restraint to register, or you may register online at http://www.clekinc.com/register. For recall...
certification height and weight limitations WARNING shoulder belts Using this booster seat with a child vehicle classification to the child. This booster seat is for use only in the following classes of vehicle: Passenger Cars, Trucks, and Multi-Purpose Passenger Vehicles such as SUVs (sports utility vehicles) and CUVs The child MUST meet ALL of the following (crossover utility vehicles).
If you are not sure where to Anchorage System (UAS). The term refers to the between the seat back and seat cushion. The clek ™ booster seat has been designed to attach securely Figure 1 year vehicles have LATCH anchorage systems.
Vehicle Seat Belt Requirements booster seat on vehicle seats facing sideways or backwards. WARNING use look very much like seat belts that are safe to use. If you are unsure, consult position. Check that the seat back is locked. vary from vehicle to vehicle and from seating location to seating location in the same vehicle.
Page 10
installing/removing booster seat WARNING in vehicle WARNING Failure to properly install or use this booster seat increases the risk of Figure 1 Figure 2 Figure 3...
Page 11
Installing Booster Seat in Vehicle Press the LATCH connectors using LATCH connectors against the LATCH lower anchors until you hear each LATCH connector click. Select a forward facing vehicle position which has a lap and shoulder belt. Locate the LATCH lower in the “LATCH Anchorage System”...
Page 12
Installing Booster Seat in Vehicle WARNING without using LATCH connectors Select a forward facing vehicle position which has a lap and shoulder belt. Position the booster seat with LATCH connectors tucked into the crease between the seat back and seat cushion. WARNING This booster seat MUST remain connected to the LATCH lower anchors in the vehicle or secured...
Page 13
Removing Booster Seat in Vehicle (olli model only) ™ Locate the release strap hanging at the front of the seat. Locate the red buttons on the front of the LATCH connectors. Place one hand FIRMLY on the front edge of the booster seat. Use the other hand...
Page 14
securing child in booster seat The child MUST sit in the booster seat with their back flat against the vehicle seat back. The tops vehicle seat back or a fully deployed head restraint WARNING could result without proper head support. child to buckle themselves in this booster seat.
Page 15
When sitting on the booster seat, the shoulder belt vehicle lap-only belt system. Inboard Armrest twisted. A snug seat belt does not allow any slack. It lies in a relatively straight line without behind the armrest. WARNING Incorrect Installation...
Page 16
owner’s manual storage After carefully reading and following these instructions, store the instruction manual in its pocket located on the bottom of the seat as shown. WARNING Figure 1 Figure 2 Figure 3...
care & cleaning Pull up on the bottom flap and sides of the seat cover releasing the fastening strips. Flip the bottom flap forward so that it hangs in front of the seat. WARNING Unfasten the triangular flaps and flip them sideways so that they hang off to the side of the seat.
Page 18
Reinstalling Cover Unfasten the seat cover and align it with the seat frame. Place the base frame right side up with Pull the cover over the frame, starting the LATCH connectors pointing toward from the front of the seat (opposite your body.
Warranty Period, Clek Inc. will, at its option, repair or replace this product if it is found by the man ufacturer to be defective in material or workmanship. Clek Inc. reserves the right to discontinue or change parts, fabrics, models, or products, or to substitute this product with a comparable model or product.
Page 20
Warranty Limitations This warranty does not cover the effects of normal wear and tear or damages resulting from to the repair or replacement of the product. This limited warranty is conditional upon strict dealer selling this product be liable to you for any damages, including incidental or consequential damages, arising out of the use or inability to use this product.
Page 21
Clek Inc. Toronto, Ontario, Canada rel.01APR12...
Need help?
Do you have a question about the Olli and is the answer not in the manual?
Questions and answers