Clock Set - JVC DR-M1SLE Instructions Manual

104

Clock Set

● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set to "ON" or "OFF" at the
Clock Set screen (the default setting is "OFF"). (
IMPORTANT: If you turn off Just Clock, the accuracy of your
unit's built-in clock may be reduced, which could adversely
effect timer recording. We recommend you to keep Just
Clock on. In cases where the clock setting data from a PDC
signal is incorrect, however, you are advised to keep Just
Clock set to "OFF".
IMPORTANT:
If you performed Auto Set Up (
Download (
previously, the unit's built-in clock is also set automatically.
Perform the following steps only if —
— Auto Clock Set has not been performed correctly by Auto
Set Up or Preset Download.
OR
— you want to change Just Clock setting. (
the left column)
A
Access the Main Menu screen.
Press SET UP.
B
Access the "CLOCK SET" screen.
A Press w e to select
"INITIAL SET UP", then
press ENTER.
B Press w e to select
"CLOCK SET", then press
ENTER.
C
Set the date and time.
A Press rt to select "YEAR", then press ENTER.
B Press rt to set the year, then press ENTER.
● Repeat the same procedure to set the date and time. When
you set the time, press and hold rt to change the time by 30
minutes.
● When you set the date, press and hold rt to change the date
by 15 days.
pg. 105)
SUBSIDIARY SETTINGS (cont.)
pg. 21) or Preset
pg. 23), without ever having set the clock
"Just Clock" in