Hamworthy F40V Installation, Commissioning And Operating Instructions page 29

8.2.1 - Info button
A change on the information level can be made at any time by pressing the Info button.
Additional pushes of the Info button will deliver the following data sequence provided by the information level.
◄
◄
◄
◄
X.
Ex
Extended Info mode - when on the information level, extended info mode levels b, c & d can be displayed.
Button
HAMWORTHY HEATING LTD
|
- refer to figure 8.2.1.1
dhw temperature - not used
Water Pressure
Operating phase - refer to section 8.2.15
Outside temperature
Error code - refer to section 8.2.14
Boiler temperature
Press one of these buttons to return to the default display
Press both line selection buttons simultaneously for at least 3 seconds
Press one of these buttons to select the required display level
Press one of these buttons to select the required display value of the level
Press the Info button to switch to the info display
Press one of these buttons to return to the default display
Operation
Lockout reset
Enable dhw mode
Enable heating circuit
mode
Heating circuit
temperature setpoint
dhw temperature setpoint
Line selection (down / up)
Adjustment of settings
Information
Enable Maintenance mode
Function
Resetting the LMU
dhw on/off - not used
selection of operating mode:
Automatic operation
Continuous 'Normal' Operation
Continuous 'Reduced' Operation
Standby
Adjustment of boiler or room
temperature setpoint.
Adjustment of dhw temperature setpoint -
not used
Selection of operating parameter
Adjustment of parameter settings
Select information display screens
Press buttons simultaneously to select
23
FLEET V series
Refer to Figure 8.2.2
500001213/G