Auto White Balance Standard Data Input; Auto White Balance Nd Filter Compensation Adjustment - Sony DSC-F505 Service Manual
Digital still camera
Hide thumbs
Also See for DSC-F505:
- Operating instructions manual (184 pages) ,
- Service manual (129 pages)
Table of Contents
Advertisement
10. Auto White Balance Standard Data Input
Adjust the white balance standard data at 3200K.
Mode
STILL
Subject
Clear chart
(Color bar standard picture frame)
Adjustment Page
F
Adjustment Address
3A to 3D, 59
Note: Check that the data of page: 6, address: 02 is "00". If not, turn the
power of the unit OFF/ON.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: 5, address: F1, and set data: FF.
3)
Select page: B, address: 41, and set data: 30.
4)
Select page: F, address: 37, and set data: 9B.
5)
Select page: 6, address: 01, set data: 11, and press the PAUSE
button.
6)
Select page: 6, address: 01, set data: 0B, and press the PAUSE
button.
(The auto white balance standard data input is performed and
the adjustment data is stored in page: F, address: 3A to 3D,
59.)
7)
Select page: 6, address: 02, and check that the data is "01".
Processing after Completing Adjustments:
1)
Select page: B, address: 41, and set data: 00.
2)
Select page: 6, address: 01, and set data: 00.
3)
Select page: F, address: 37, set data: 93, and press the PAUSE
button.
4)
Select page: 5, address: F1, and set data: 00.
5)
Select page: 0, address: 01, and set data: 00.
11. Auto White Balance ND Filter Compensation
Adjustment
Adjust to the proper auto white balance output data with Built-in
ND filter.
If it is not correct, auto white balance and color reproducibility will
be poor.
Mode
Subject
Filter
Adjustment Page
Adjustment Address
Note 1: Perform "Auto White Balance Standard Data Input" before this
adjustment.
Note 2: Check that the data of page: 6, address: 02 is "00". If not, turn the
power of the unit OFF/ON.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: 5, address: F1, and set data: FF.
3)
Select page: B, address: 41, set data: 30, and press the PAUSE
button.
4)
Select page: 6, address: 1C, set data: 03, press PAUSE button
and wait for one second.
5)
Select page: F, address: 37, and set data: 9B.
6)
Select page: 6, address: 01, set data: 11, and press the PAUSE
button.
7)
Select page: 6, address: 01, set data: 09, and press the PAUSE
button.
(The auto white balance adjustment ND filter compensation is
performed and the adjustment data is stored in page: F, address:
4F and 50.)
8)
Select page: 6, address: 02, and check that the data is "01".
Processing after Completing Adjustments:
1)
Select page: B, address: 41, and set data: 00.
2)
Select page: 6, address: 1C, set data: 00, and press the PAUSE
button.
3)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
4)
Select page: F, address: 37, set data: 93, and press the PAUSE
button.
5)
Select page: 5, address: F1, and set data: 00.
6)
Select page: 0, address: 01, and set data: 00.
5-27
STILL
Clear chart
(Color reproduction adjustment frame)
Built-in ND filter
F
4F, 50
Advertisement
Table of Contents
