Hamamatsu Photonics C11440-42U Instruction Manual page 41

External trigger delay
function
External signal output
Image processing function
Interface
Lens mount
*
1 Calculated from the ratio of the full well capacity and the readout noise.
*
2 Digital binning processing in the camera.
(2) Power supply specifications
Input power supply
Camera
Power consumption
Input power supply
AC adaptor
Typical output
Power consumption
•
Note
(3) Operating environment
Ambient operating temperature
Ambient storage temperature
Ambient operating humidity
Ambient storage humidity
Operating space
(4) Dimensional outline and weight
Dimensional outline
Weight
Note
•
(5) Applicable standards
EMC EN61326-1: 2006 Class A
C11440-42U/C11440-42U01 Instruction manual_Ver.1.1
0 µs to 10 s (10 µs steps)
Global exposure timing output
Trigger ready output
Programmable timing output 1
Programmable timing output 2
Programmable timing output 3
(Continuous High or Low output)
Multi-channel Sync
Real-time offset correction
Real-time gain correction
Real-time defect pixel correction (Default)
USB 3.0 Super Speed
C11440-42U: C-mount
C11440-42U01: F-mount
DC12 V
26 W
AC100 V to AC240 V 50 Hz/60 Hz
DC12 V
75 VA
Fluctuations of input power supply voltages are not to exceed ± 10 % of the nominal
voltage.
0 ºC to + 40 ºC
-10 ºC to + 50 ºC
Less than 70 %, no condensation
Less than 90 %, no condensation
Indoor, altitude up to 2000 m
85 mm × 85.5 mm
(W)
Camera
AC adaptor + power supply cord
Please see Chapter 14 [DIMENSIONAL OUTLINES] for detail of dimensions.
× 120.5 mm
(H) (D)
Approx. 1.1 kg
Approx. 1.0 kg
39