Hamamatsu Photonics C11440-42U Instruction Manual page 14

C11440-42U/C11440-42U01 Instruction manual_Ver.1.1
⑧ Air outlet
This is the outlet for the heat ventilation.
•
•
⑨ Installation holes for Base plate
These are the holes to install the base plate.
•
12
To prevent overheating inside the camera, do not wrap the camera in cloth or
other material, or block the camera's ventilation.
If the camera is being operated in an enclosed environment, ensure to keep
clearance at least 2 cm from both intake and exhaust vents when setting up.
If you use the adjuster pole and the base plate, see each installation manual.