Parts And Their Functions; Control Panel - Panasonic AV-HS410N Operating Instructions Manual

1. Parts and their functions

1-1. Control panel

KEY
AMBER : FILL / GREEN : SOURCE
AUX
PGM
A
1/13
PST
B
1 POWER indicator [POWER]
This indicator lights when the power switch () on the rear
panel is set to ON while power is supplied to the AC power
input socket ().
2 ALARM indicator [ALARM]
This indicator lights up when any of the following types of
trouble has occurred.
• When the cooling fan has stopped operating
• When something is wrong with the power supply
(a drop in the voltage)
• When high temperatures are reached inside the unit
When any of these events has occurred, an alarm
message is displayed on the built‑in display.
When an alarm has occurred, details of the trouble
concerned can be checked by selecting the System menu
followed by the Alarm sub menu.
The alarm information can be output from the TALLY/GPI
connector () on the rear panel to an external device.
For further details, refer to "3‑7‑2. Alarm message" in the
<Operation and Settings> Operating Instructions.
When an alarm has occurred, stop using the unit
immediately, and be absolutely sure to contact your dealer.
Continuing to use the unit even after an alarm has
occurred could damage the unit.
Memory card area
Display area
F1 F2 F3 F4 F5
PinP1 PinP2 DSK AUX1 AUX2 AUX3 AUX4
AUX BUS DELEGATION
Crosspoint area
2/14 3/15 4/16 5/17 6/18 7/19 8/20
User button area
U1 U2 U3 U4 U5 U6
USER BUTTON
MENU BKGD KEY PinP1
PICT
DSK
MODE CBGD CHRKEY PinP2
WFM VMEM SHOT XPT IN
MENU
OFF
VECT SD Card EVENT MV OUT
DISPLAY MENU SELECT
7 8 9
SHOT XPT
STORE
MEM DSBL
NEW COPY PASTE
STILL 1 STILL 2 TRIM IN REC
Memory/wipe pattern/
4 5 6
EVENT RE � / +
MEM CALL PAGE
INS DEL MOD
CLIP 1 CLIP 2 TRIM OUT STOP
number key area
1 2 3
PLUGIN
DEL
MEM1
＜ ＞ REV
TAKE
ENTER
＜ ＞ REV
PLUGIN 0/10 . C
EDIT
MEM2
＜＜ ＞＞ UNDO
＜＜ ＞＞ TRIM OFF PLAY
MEMORY / WIPE PATTERN / 10 KEY
DISP MV PVW PGM N/R R
AUX/DISP SOURCE WIPE DIRECTION
SHIFT
BKGD KEY
MIX MIX
Transition area
WIPE WIPE
SHIFT MIX WIPE
9/21 10/22 11/23 12/24
SHIFT CUT AUTO
3 LINK indicator [LINK]
While the unit is linked with an external device, this
indicator lights up when the unit is controlled by a plug‑in
software application.
For the settings used when the unit is to be controlled by a
plug‑in software application, check out the specifications of
the application concerned.
For the settings to be performed for the external device,
refer to the operating instructions of the device concerned.
17
Positioner area
Live Switcher AV-HS410
U7 U8
POWER

ALARM
LINK
TIME PLUGIN
CONFIG
MENU
HOLD
SYS
Z
MENU
INPUT
VMEM
X/Y
POSITIONER
BKGD
PATT
KEY
PATT
KEY FTB
ON ON
PinP1 PinP2
ON ON
DSK
ON

