Setting The System Format; Setting The Date And Time - Panasonic AV-HS410N Operating Instructions Manual

2. Preparations

2-2-4. Setting the system format

One system format (input/output signal) can be selected.
1 Press the s button to light its indicator, and display the
System menu.
2 Use [F1] to display the Format sub menu.
3 Use [F2], select the format using the Format item, and
press the [F2] to enter the selection.
Setting the 16:9 squeeze mode
When the 16:9 squeeze mode is selected, a border width
(wipe or PinP) is established that considers cases where SD
format images are to be converted into the 16:9 aspect ratio
and used.
This setting is possible when SD is selected as the system
format setting.
On the Format sub menu, use [F4] to select whether to
support the squeeze mode using the 16:9 Squeeze item.
On The squeeze mode is supported.
Off The squeeze mode is not supported.
Border width (graphical representation) when the squeeze
mode is supported
Squeeze (4:3)

2-2-5. Setting the date and time

The user can set the date and time to be used as the memory
card's time stamp.
Be absolutely sure to set them when an memory card is to be
used.
Setting the date
1 Press the s button to light its indicator, and display the
System menu.
2 Use [F1] to display the Date sub menu.
3 Use [F2] to set the year using the Year item.
4 Use [F3] to set the month using the Month item.
5 Use [F4] to set the day using the Day item.
6 Press the [F5] to enter the year/month/day.
Setting the time
1 On the System menu, use [F1] to display the Time sub
menu.
2 Use [F2] to set the hour using the Hour item.
3 Use [F3] to set the minutes using the Minute item.
4 Use [F4] to set the seconds using the Second item.
5 Press the [F5] to enter the hour/minutes/seconds.
16:9
32