Table of Contents
Advertisement
Introduction
Introduction
Document history
Version
Date
V2.0.0
15.04.10
V3.0.1
03.06.10
V4.0.0
25.10.10
This Manta Hardware Installation Guide describes the hardware installation
procedures for AVT Manta cameras.
The Manta Hardware Installation Guide answers questions about putting
AVT cameras into operation, about safety warnings, pin assignments on I/O
connectors and GigE ports. Learn how to get more information at the AVT
website (accessories), how to get information about software applicable with
AVT Manta cameras and how to get deep information from the AVT MANTA
Technical Manual.
Note
Please read through this manual carefully before install-
ing the hardware on your PC or laptop (Gigabit Ethernet
network card and cables) and operating the AVT cameras.
Remarks
New Manual - SERIAL status
•
Minor corrections
•
Added link to AVT knowledge base in Chapter
viewer
•
Added Manta G-046, G-145, G-201, G-146
•
Added Pin8/9: RS232 in
connector pin assignment
•
Added Manta G-033, G-504
•
Added 100 Mbit/s for LEDs, see
page 45
New file format:
•
Changed file format from FM7 to FM9
Improved descriptions:
•
For resistor values in
external resistor
to be continued on next page
Table 1: Document history
on page 51.
Figure 25: MANTA: Camera I/O
on page 47
Figure 31: MANTA: OutVCC and
on page 51
Manta Hardware Installation Guide V4.1.0
GigE sample
Status LEDs (MANTA)
on
5
Advertisement
Table of Contents
