Gigabit Ethernet Port (Manta); Status Leds (Manta) - AVT Manta Installation Manual

Camera interfaces

Gigabit Ethernet port (MANTA)

Status LEDs (MANTA)

This port conforms to the IEEE 802.3 1000BASE-T standard for Gigabit
Ethernet over copper. It is recommended that Cat 5e or Cat 6 compatible
cabling and connectors be used for best performance. Cable lengths up to
100 m are supported.
You can also use the Gigabit Ethernet port to provide Power over Ethernet
(PoE) to the camera. Power must be compliant to IEEE 802.3at.
Note There is no Gigabit Ethernet cable provided with the camera.
For accessories contact customer care:

See Chapter
The color of the LEDs have the following meaning:
LED color
Solid orange
Flashing orange
LED color
Solid green
Flashing green
LED color
Solid green
LED off
Table 6: Status LED3: PoE cameras only and
Manta G-145-30fps / Manta G-201-30fps (non PoE)
Contacting Allied Vision Technologies
Status
Ethernet link with 1 Gbit/s
established
Ethernet activity with 1 Gbit/s
Table 4: Status LED1
Status
Ethernet link with 100 Mbit/s
established
Ethernet activity with 100 Mbit/s
Table 5: Status LED2
Status
Camera is powered (HIROSE or PoE)
No power
Manta Hardware Installation Guide V4.1.0
on page 4.
45