Avt Manta Cameras: Installing Hardware And Software; Hardware Conditions - AVT Manta Installation Manual

AVT Manta cameras: installing hardware and software

AVT Manta cameras: installing
hardware and software

Hardware conditions

This chapter describes the hardware installation of AVT Manta cameras,
Gigabit Ethernet network cards (PC or laptop) and the necessary cabling.
Note For software/driver installation read the documentation of
the AVT Universal Package or AVT PvAPI SDK.

Read this chapter carefully and follow the instructions. nev-
ertheless, if you get problems read Chapter
on page 54.
www Documentation of AVT Universal Package or AVT PvAPI
SDK:

http://www.alliedvisiontec.com/emea/support/downloads/
software.html
• AVT Manta camera with corresponding lens
• PC or laptop with built-in Gigabit Ethernet interface
• The following Gigabit Ethernet network cards are recommended for full
camera performance:
– Intel Pro 1000 GT (PCI, 1 port)
– Intel Pro 1000 PT (PCIe x1, 1 port)
– Intel CT (PCIe x1, 1 port)
– Intel Pro 1000 PT Dual Port (PCIe x4, 2 ports)
– Intel Pro 1000 PT Quad Port Low Profile (PCIe x4, 4 ports)
Troubleshooting
Manta Hardware Installation Guide V4.1.0
24