Table of Contents
Advertisement
Camera interfaces
Camera I/O connectors (12 pin) and cables:
MANTA
The 12-pin camera I/O connector (MANTA) is also designed for industrial use
and, in addition to providing access to the inputs and outputs on the camera,
it also provides a serial interface for e.g. the firmware update.
The 12-pin camera I/O connector (MANTA) provides also power if PoE is not
used.
The connector is available in straight and angled version.
Note
AVT supplies suitable I/O cables and trigger cables of differ-
ent lengths (up to 10 m).
www
For more information on cables and on ordering cables online
(by clicking the article and sending an inquiry) go to:
http://www.alliedvisiontec.com/emea/products/accessories/
firewire-accessories.html
Note
For pinning of the I/O connectors as viewed in pin direction
see:
• Chapter
ment
MANTA (PoE) camera I/O connector pin assign-
on page 47
Manta Hardware Installation Guide V4.1.0
46
Advertisement
Table of Contents
