AVT Manta cameras: installing hardware and software
Event channel
Select the desired camera from the cameras window of the GigE Sample
Viewer.
Left-click the film icon
The Events window will appear:
Figure 20: GigE Sample Viewer: Event channel window and Controls window (EventControl)
This is a tool used to monitor in-camera events such as AcquisitionEnd,
ExposureStart, ExposureEnd, etc.
The factory default settings disable all event notifications.
Use the camera controls to select which events to monitor.
View the EventID to understand the display format in the Events window.
RS232 serial interface
Select the desired camera from the cameras window of the GigE Sample
Viewer.
Left-click the 1101 icon
Manta Hardware Installation Guide V4.1.0
40