AVT camera cleaning instructions
AVT camera cleaning instructions
Warranty
This chapter describes safety instructions/cautions valid for all AVT GigE
camera families in case of cleaning lenses, optical filters/protection glass or
sensors.
Note
• Please read these instructions before you contact your
AVT camera dealer for assistance.
• Ask your AVT camera dealer if you are not familiar with
the procedures described below.
Caution
Warranty precautions
• To ensure your warranty remains in force:
– Do not open the camera housing.
– Follow instructions described below.
– Use only optical quality tissue/cloth if you must
– Use only optics cleaner (60% ethyl alcohol, 40%
– Do not use compressed air which can push dust
• AVT does not warranty against any physical damage to
the sensor/filter/protection glass or lenses caused by
the user during the cleaning process.
Caution
General warnings
• Do not touch any optical component with bare fingers.
Oil or other impurities may damage the surface.
• Only follow the processes described below if you are
familiar with these procedures and if you have the
necessary equipment.
• If you are uncomfortable with the outlined
precautions, please return your camera to AVT for
cleaning.
clean a lens or filter.
ether). Never use aggressive cleaners like benzine
or spirit. Such cleaners may destroy the surface.
into camera and lens.
Manta Hardware Installation Guide V4.1.0
18