Door Arrester, Door Hinge And Lock Cylinder, Lubricating; Door Arrester, Door Hinge And Lock Cylinder, Lubricat- Ing - Audi TT 2007 Repair Manual

Switch off the transportation mode using Guided Fault Finding or
Guided Functions.
– Follow these steps in sequential order.
♦ Connect VAS 5051/5052
♦ Vehicle Self-Diagnosis (OBD)
♦ Collected services
♦ Energy manager, deactivate transport mode
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
2.41 Door Arrester, Door Hinge and Lock Cyl‐
inder, Lubricating
– Perform the following steps in the given sequence:
Note
Vehicle must be at least at room temperature.
♦
Operate the moveable components several times to allow the
♦
universal oil or spray lubricant to seep in.
Remove any excess lubricant with a lint-free cloth.
♦
Door Arrester
– Remove the protective cap -1- in the direction of the arrow.
– Lubricate the door arrester on the marked positions -arrows-.
• Use universal oil spray G 000 115 A2.
Door Hinge
– Lubricate the door hinge on the marked positions -arrows-.
• Use universal oil spray G 000 115 A2.
Lock Cylinder
– Lubricate the lock cylinder.
• Use spray lubricant G 052 778 A2.
with respect to the correctness of information in this document. Copyright by AUDI AG.
Maintenance Procedures - Edition 08.2011
Audi TT 2007 ➤
2. Maintenance Procedures
55