Clock, Setting; Spark Plugs, Removing And Installing - Audi TT 2007 Repair Manual

2.46

Clock, Setting

Radio Clock
Note
The clock can function as a radio-controlled quartz clock as well
as a normal quartz clock.
If an acceptable radio clock signal is received, clock automatically
switches to "radio-controlled quartz clock" operating mode. The
radio clock reception symbol (radio tower radiating waves) ap‐
pears in display. If the clock does not receive a valid signal, it
automatically switches to "quartz clock" mode after 3 days and
radio clock reception symbol goes out.
2.47

Spark Plugs, Removing and Installing

⇒ "2.47.1 General Information", page 57
⇒ "2.47.2 6-Cylinder 3.2 MPI", page 59
⇒ "2.47.3 4-Cylinder, 2.0 TFSI", page 60
⇒ "2.47.4 4-Cylinder, 2.0 TFSI", page 60
⇒ "2.47.5 5-Cylinder, 2.5 TFSI", page 61
2.47.1 General Information
Note
Observe waste disposal regulations!
Special tools and workshop equipment required
♦ Spark plug wrench -3122B-
♦ Ignition Coil Puller -T40039-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Maintenance Procedures - Edition 08.2011
Audi TT 2007 ➤
2. Maintenance Procedures
57