Spare Tire - Audi TT 2007 Repair Manual

Tires, Checking Wear Pattern
– The wear pattern of the front wheels can be used to assess
whether a check of the track and camber is necessary:
♦ Feathered edges of the treads may indicate faulty toe adjust‐
ment.
♦ One-sided tread wear is mostly caused by faulty camber.
Note
If such wear patterns are found, determine the causes by check‐
ing the wheel alignment (repair measure).
Tread Depth, Checking
♦ Minimum tread depth: 1.6 mm
Note
This value may vary for individual countries due to different
♦
legislative regulations.
If the tread wear is close to the wear limits, inform customer
♦
and note findings on the repair order.
2.8.2 Tire Pressure, Correcting
The tire pressure value are on the label on the B-pillar.
Note
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
Observe that the inflation pressure specifications on the label re‐
with respect to the correctness of information in this document. Copyright by AUDI AG.
fer to the air pressure of cold tires. Do not reduce tire pressure
when the tires are warm.
2.8.3

Spare Tire

• Spare wheel with standard tire
Maintain the highest specified tire pressure for the tire size ac‐
cording to the tire pressure label.
• Mini spare tire
The tire pressure is on the sidewall.
• Break-down kit
Tire Repair Kit, Checking Expiration Date
Note
Tire valves must be sealed with valve caps. Otherwise, dirt can
enter valve needle which becomes jammed and can no seal shut.
Maintenance Procedures - Edition 08.2011
Audi TT 2007 ➤
2. Maintenance Procedures
21