Clinton Electronics CE-20DVRPVM-HD User Manual page 13

Lens (selection)
1. When the SETUP menu is displayed on the screen, position the arrow to point to LENS by using the
UP or DOWN button.
2. You may select the type of lens you wish to use by pressing the LEFT or RIGHT button.
DC: Auto iris lens selection-
• The optimum level of brightness can be
adjusted within the range of 1 ~ 70.
MANUAL: Manual lens selection-
• If MANUAL mode is selected, the brightness
can be adjusted in ESC mode.
3. Press the SET button to return to previous menu.
Shutter (condition and speed control)
1. When the SETUP menu is displayed on the screen, position the arrow to point to SHUTTER by
using the UP or DOWN button.
2. Select the shutter mode by pressing the LEFT or RIGHT button.
FLK: Select FLK mode when flickering occurs
on the screen due to an imbalance between
illumination and frequency.
NTSC Model:1/100, PAL Model 1/120
ESC: When ESC mode is on, the shutter speed
is controlled automatically according to the
brightness of the screen.
3. Press the SET button to return to previous menu.
• While using the internal synchronous system, if the shutter setting is on ESC, and
the camera is directly facing a bright fluorescent light, the image on the screen
can be adversely affected. Therefore, choose the installation location with care.
• When MANUAL mode is on, the SENS-UP function does not operate.
13