Fixed-Word Display Keypads - ADEMCO VISTA-10SEa User Manual

Hide thumbs Also See for VISTA-10SEa:
Table of Contents

Advertisement

SUMMARY OF AUDIBLE/VISUAL NOTIFICATIONS
SOUND
LOUD,
Fire Alarm
INTERRUPTED*
Keypad & Ext.
Sounder
LOUD,
Burglary / Audible
CONTINUOUS*
Emergency Alarm
Keypad & Ext.
Sounder
ONE SHORT BEEP
System is in Test Mode
(not repeated)
Keypad only
a. Low battery at transmitter
ONE BEEP
(every 40 seconds)
b. System Main Battery Weak
Keypad only
c. Trouble
TWO SHORT
Arm Away or Maximum
BEEPS
Keypad only
THREE SHORT
a. Arm Away or Stay
BEEPS
Keypad only
b. Zone opened while system in Chime Mode
c. Zone opened while system in Test Mode
RAPID BEEPING
Memory of Alarm
Keypad only
SLOW BEEPING
a. Entry Delay Warning
Keypad only
b. Exit Delay Alert
(if programmed)
*
If bell is used as external sounder, fire alarm is pulsed ring (see page 32); burglary/audible emergency is steady ring.
Note: Also see "Other Trouble Displays" and "Total Power Failure" under TROUBLE CONDITIONS on pages 30 and 31.
– 36 –

Fixed-Word Display Keypads

CAUSE
DISPLAY
FIRE and ALARM are displayed; protection zone
in alarm is displayed.
ALARM is displayed; protection zone in alarm is
also displayed.
Also see page 32.
Opened zone identifications will appear.
a. BAT displayed with ID number of transmitter.
b. BAT displayed with no transmitter ID.
c. CHECK displayed. Troubled protection zone
is displayed.
AWAY and (if MAXIMUM) INSTANT are
displayed.
a. STAY and (if INSTANT) INSTANT are
displayed. Red ARMED indicator is lit.
b. CHIME displayed. Pressing READY [ ] key
will display opened zone.
c. Open protection zone number is displayed.
FIRE and/or ALARM is displayed; zone in alarm
is displayed.
a. No display during delay. Exceeding the delay
time without disarming causes alarm.
b. AWAY or (if MAXIMUM) AWAY INSTANT is
displayed. Slow beeps change to fast beeps
during last 5 seconds of exit delay.

Advertisement

Table of Contents
loading

Table of Contents