Table 4-3. List Of Remote Control Board Faults - Will Burt Night Scan Chief Installation, Operation & Maintenance Manual

4.5.1.3 Remote Control(s) Board
The handheld remote control board is located in the handheld unit and is assigned unit number
three (3). The Remote Control board may generate the messages of Table 4-3:
Message Meaning
Err 3,07 Unrecoverable
Communicatio
n Error
Err 3,08 Software Fault
Revision 1

Table 4-3. List of Remote Control Board Faults

Root Issue
The Remote Control Bad or improper
board has not connection in
received communications link,
communications or Remote Control is
from the base board not properly powered.
recently Check continuity of
the data lines from
the DC power cable
connector to the
Remote Control
connector. Refer to
system schematics in
section 4.4. Check to
make sure that the
base board software
is 2.6 or newer. Refer
to section 0 on how
to check software
revision level. Also
check that the shield
in the junction box
has a good electrical
connection all the
way to the frame rail.
Internally detected Indicates a software
error problem. Notify Will-
Burt
Potential Causes
Night Scan Chief
4-17