Operating Instructions - Will Burt Night Scan Chief Installation, Operation & Maintenance Manual

Night Scan Chief
CHAPTER 3

OPERATING INSTRUCTIONS

All operators must read the Operation section of this manual
and be properly trained.
Keep personnel clear of mast while during operation.
For outdoor use only. Do not use in areas that have been
classified as hazardous as defined in Article 500 of the
National Electric Code.
Do not use in the presence of flammable gases or liquids
such as paint, gasoline or solvents. Do not use in areas of
limited ventilation or where high ambient temperatures are
present. Contact with combustible materials can cause
ignition resulting in fire or explosion.
Before operating, make certain that the area is free of
overhead power lines and other unwanted sources of
electricity. Be sure to allow sufficient clearance on all sides
of mast to allow for side sway.
Do not move vehicle until mast has been securely stowed.
Revision 1 3-1