The Chime Facility - Texecom Veritas Excel Master User Manual

Veritas Excel Master User Guide

The CHIME Facility

It is possible to set one or more zones to chime when the system is unset. When a zone
is enabled for Chime and Chime is turned on, the control panel will sound a tone
whenever the zone is opened.
To Program the Zones which CHIME
Enter your 4-digit Access code
show the zones that are currently selected for Chime (in this example Zones 1 & 3 are
selected for Chime).
! "
To display the descriptive text associated with a particular zone number, press
and hold the corresponding key
Press the number key(s)
completed press
*
press to turn Chime off (the control panel will sound the Error tone).
,
! "
Once zones have been programmed for Chime, the Chime feature can be turned
on or off by just pressing
To Turn CHIME On
Press , the Chime tone will sound and the display will look something like this (after
-
5 seconds the display will revert to normal):
To Turn CHIME Off
Press , the Error tone will sound and the display will look something like this (after
-
5 seconds the display will revert to normal):
! "
If no zones have been enabled for Chime, then turning Chime on and off will have
no effect.
INS166-2
####
1#/O3$%;,)?$%@".
!"#$0%7:&:::::
... of the zone(s) to be selected or deselected. When
#
to turn Chime on (the control panel will sound the Chime tone) or
.
-
;,)?$%)0%PQ
!"#$0%7:&:::::
;,)?$%)0%P@@
!"#$0%7:&:::::
Operating the Alarm System
and press
Zones
1 2 3 4 5 6 7 8
(LCD keypad only).
#
Zones
1 2 3 4 5 6 7 8
Zones
1 2 3 4 5 6 7 8
, the display will
-
Unset
Tamper
Unset
Tamper
Unset
Tamper
9