To Walk Test The System - Texecom Veritas Excel Master User Manual

Programming the Alarm System

To Walk Test the System

The control panel has a Walk Test facility for checking the operation of detection
devices.
Enter your 4-digit Access code
display looks like this:
Enter , the display will look something like this:
+.
Press , the control panel will sound the quiet exit tone and the display should look
*
something like this:
Conduct a walk test by triggering each of the system's detection devices in turn and
check that the control panel registers the corresponding zone as open, the display
should look something like this:
! "
When any zone is opened the display will show the corresponding zone number.
The control panel will also sound a repeating series of bleeps corresponding to
the open zone number (i.e. Zone 1 bleeps once, Zone 2 bleeps twice, etc.). If
more than one zone is open the bleeps will correspond to the highest zone
number (e.g. if Zone 2 and Zone 6 are open the control panel will bleep 6 times).
When completed press
! "
To display the descriptive text associated with a particular zone number, press
and hold the corresponding key
Wherever a
search through the various options. The
displayed option.
12
####
D."S./?%6"<$%%%V
1#*$.%P>*)"#
U/3X%M$0*%%%%%%
YDRPZ[%*"%0*/.*
U/3X%M$0*%%%%%%V
!"#$%'%:::::::::
U/3X%M$0*%%%%%%V
!"#$%'%:8:::5:::
, the system will return to User Programming.
,
symbol appears on the display, the
/
Veritas Excel Master User Guide
Zones
1 2 3 4 5 6 7 8
Zones
V
1 2 3 4 5 6 7 8
Zones
1 2 3 4 5 6 7 8
Zones
1 2 3 4 5 6 7 8
(LCD keypad only).
#
key can then be used to select the
0
and press . Wait until the
*
Unset
Tamper
Unset
Tamper
Unset
Tamper
Unset
Tamper
key can be used to
/
INS166-2