Operating The Alarm System; To Full Set The Alarm; To Part Set The Alarm - Texecom Veritas Excel Master User Manual

Veritas Excel Master User Guide

3. Operating the Alarm System

To FULL Set the Alarm

Ensure that the premises are secure (all doors and windows closed etc).
Enter your 4-digit Access code
will sound and the display will look something like this:
Leave the premises, when the system has set the exit tone will stop.
! "
Your Installer may have programmed the system so that it can be set by just
pressing $
4-digit Access code above.

To PART Set the Alarm

Ensure that the premises are secure (all doors and windows closed etc).
Enter your 4-digit Access code
Press
%&!
i.e. = Part Set Suite 2 selected, the exit tone will sound quietly and the
&(
display will look something like this:
! "
Zones being omitted by the Part Set Suite will alternate between the zone number
and a ' ' (in this case Zones 5, 6 & 7 are the omitted zones).
F
Zones NOT being omitted by the Part Set Suite are displayed as '
Leave the protected area. When the system has set, the exit tone will stop and the
display will look something like this for 5 seconds before returning to normal:
! "
Your Installer may have programmed the system so that it can be set by just
pressing (
4-digit Access code above.
If Part Set Suite 1 is required, it is NOT necessary to press
(
.
INS166-2
####
@A33%B$*%BA)*$
!"#$0%::::::::::
, if this is the case then there is no need to enter the
####
or to select the required Part Set Suite followed by
'
D/.*%B$*%BA)*$%8
!"#$0%::::C5E:::
D/.*%B$*%BA)*$%8
!"#$0%::::FFF:::
D/.*%B$*%8
45%6/.%%78944:&4
, if this is the case then there is no need to enter the
Operating the Alarm System
and press
Zones
Unset
1 2 3 4 5 6 7 8
Tamper
.
Zones
Unset
1 2 3 4 5 6 7 8
Tamper
Zones
Unset
1 2 3 4 5 6 7 8
Tamper
Zones
Unset
1 2 3 4 5 6 7 8
Tamper
$ , the exit tone
(
: '
before pressing
%
5