Log Placement; Vdy24/18D2 - MHSC Duzy VDY24 Installation And Operating Instructions Manual

"Duzy" Series Vented Gas Log Sets

LOG PLACEMENT

IMPORTANT: Remove logs, handling carefully by holding
gently at each end. Gloves are recommended to prevent
skin irritation from ceramic fibers. If skin becomes irritated,
wash gently with soap and water.
DUZY II VDY24/18D2A
1. Install the rear log (#1) on the two locating pins of base.
Figure 9. Visually check to verify the log is securely
placed on the pins and in contact with the grate. Figure
10
Figure 9
Rear Log #1
LG972
VDY24_18D2 base
Figure 10
2. Install the right log (#2) on top of the control cover. Slide
the log back until touching the rear log (#1). Visually
LG971
check to verify the log is resting on the grate and control
VDY24_18D2A rear log
cover. Figure 11
3. Install the left log (#3) with its bottom groove resting on
the right side of the grate bar. Slide the log back until
touching the rear log (#1). Visually check to verify the
log is resting on the grate. Figure 12
10
Locator Pins
Figure 11
Left Log #3
LG972
Control
Cover
Figure 12
4. Install the top log (#4) with the base sitting on the rear
log (#1) and the top sitting on log (#4). Visually check
to verify the log is resting on the rear log (#1) and left
log (#3). Figure 13
LG971
Figure 13
LG973
VDY24_18D2A right log
Bottom Groove
LG974
VDY24_18D2A left log
Top Log #4
LG975
VDY24_18D2A top log
LOG PLACEMENT
Right
Log #2
LG973
LG975
LG975
32D1999