Set Sound Effect While Watching; Set Sound While Watching; Set Stereo/Mono While Watching - Baumann Meyer DT2620D Operating Instruction

Watching

Set Sound Effect while Watching

Use this function to set the sound effects.
1
Press .
2
Press again to switch the sound effect off.
For further information on the settings refer to: "Adjust Medium and Low Frequencies" on page 29.

Set Sound while Watching

Use this function to adjust the sound optimally to the content.
1
Press until the desired mode is displayed.
For further information on the settings refer to: "Adjust Individual Audio Frequencies" on page 28.

Set Stereo/Mono while Watching

Use this function to turn the stereo sound on or off.
1
Press .
The displays/controls the processing and output of the audio signal. When power is switched on, the
mode is automatically preset to stereo or dual, depending on the current transmission.
For further information on the settings refer to: "Sound Settings" on page 22.
50