Connecting The Digital Audio Output; Connecting Several Devices; Connecting Mains Cable; Connecting To The Hdmi Connection - Baumann Meyer DT2620D Operating Instruction

Connecting the Digital Audio Output

You can Connect optical digital audio cable to "DIGITAL AUDIO OUT" on the rear of the TV and the other end to
"DIGITAL AUDIO IN" of the equipment with a digital output to enjoy digital sound (Multi-Channel Surround
Sound, Stereo, Dolby Sound).
Refer to corresponding user's manual from the manufacturer for connecting the
speaker to the DVD Home Theater System or AV Receiver Amplifier.
SPDIF OUT (Optical) may have the signal compatibility problems with certain
A/V receiver and this is known issues. Due to the problems, it may have difficulty
in output sound.

Connecting Several Devices

You can use the connections described parallel . On how to select the desired source see "Select Source" on
Page 36 and "Select Signal Source for PIP" on Page 38.

Connecting Mains Cable

Connecting to the HDMI Connection

This can be applied if there is the HDMI Output connector on the external device.
What is HDMI (High-Definition Multimedia Interface)?
HDMI is a next generation interface that connects the digital audio and video signals using only one
cable without compression. The sound signal supports multi-channel (5.1 Channel). So it is called a
multimedia interface rather than a video terminal. The difference between HDMI and DVI is that the
HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) and
supports multi channel audio.
Connections and Start of Operation
1 Connecting the OPTICAL Port
Connect the OPTICAL port of the DIGITAL
AUDIO OUT on the rear of the TV to the optical
audio input of the DVD Home Theater System (or
AV Receiver Amplifier) using the optical cable.
Decrease the TV volume to enjoy the more clear and
grand sound through separate speakers.
1 Connect the mains cable.
15