Unpacking and Setup
Unpacking and Setup
Scope of Supply
Please check, that the delivery is complete.
1
Unit
2
Remote control
3
Batteries
4
Mains cable
Safety
•
Read the following instructions carefully.
•
Keep this manual at hand.
•
Closely follow the instructions given.
•
Proceed exactly as described in the instructions.
•
Do not use the unit near water.
•
Clean the unit with a dry cloth only.
•
Ensure that the ventilation openings are not covered.
•
Do not install the unit close to heat sources such as radiators, stoves or other devices (including amplifiers)
radiating heat.
•
Use grounded plugs (shock-proof plugs) and wall outlets only. If the provided plug does not fit your outlet,
consult an electrician to replace the outdated outlet.
•
Lay the power cable in a manner that does not obstruct anyone. Make sure the power cable is not damaged or
stepped on, particularly at the plug and at the exit of the unit.
•
In case you have to disconnect the unit quickly from the mains, make sure the wall socket is easily accessible.
Connect the unit as described in the instructions by the manufacturer.
•
To completely disconnect the unit from the electric power, unplug the power cable.
•
Do not use any extension cables.
•
Use the accessories specified by the manufacturer only.
4