Set Characters For Teletext; Restore Default; Settings For The Computer - Baumann Meyer DT2620D Operating Instruction

➤ Deactivate Child Lock
To deactivate child lock, proceed as described in chapter "Activate Child Lock" on page34 and select OFF.

Set Characters for Teletext

Use this function to set the character set for teletext to your region.
Picture Audio Timer
Teletext Character Group
West Europe
East Europe
Cyrillic
Move OK: Select

Restore Default

Use this function to set all settings you have made back to the default factory setting.
Picture Audio Timer
! Warning
Yes
Position OK: Select

Settings for the Computer

If you are using the unit as a monitor for your computer make the applicable settings accordingly. Set the
resolution to 1024 X 768 and the frequency to 60 Hz.
Install Setup Option
Local Lock Off
OSD Setting
No Signal Power Off 20
No Operation Power Off 180
Noise Reduction On
Teletext Character Group West Europe
MENU: Previous EXIT: Exit
Install Setup Option
Language English
Geometry
Aspect Auto
No WSS Full
No
Favourite Channel
PIP Adjustment
Factory Preset
MENU: Previous EXIT: Exit
1 Press
. To return to the main menu, press
several times.
2 Press
or and select OPTION.
3 Press
or and select TELETEXT
CHARACTER GROUP.
4 Press
or and select the character set.
5 Press
to save the settings.
The following settings are available :
Western Europe, Eastern Europe, Cyrillic
1 Press
. To return to the main menu, press
several times.
2 Press
or and select SETUP.
3 Press
or and select FACTORY PRESET.
4 Press
.
5 Press the mains switch on the back of the unit.
Settings
35