Set Sound Source; Set Time - Baumann Meyer DT2620D Operating Instruction

Settings

Set Sound Source

Use this function to set which sound you will hear when watching picture-in-picture mode.
Picture Audio Timer
Balance
Volume
Equalizer
SRS WOW
Audio Selection
HDMI Audio
Move OK: Select
The following settings are available :
Main: You will hear the sound of the main screen
Sub: You will hear the sound of the small screen

Set Time

In order to set the correct times for switching on and off automatically, the clock in the receiver must be set
correctly. By default, the unit receives the current time from the selected station. You can enter the time manually
as well. Enter the time in 12-hour format.
Picture Audio Timer
Clock
Update Pr.
On Timer
Off Timer
Audio Selection
Move 0~9 Adjust OK: Clear
30
Install Setup Option
050
019
Music
Off
Main Audio Selection
Main
HDMI
Sub
MENU: Previous EXIT: Exit
Install Setup Option
- -:- - Clock
Clock AM 1 1 : 3 4
Off
AM 12:00
Off
Main
MENU: Previous EXIT: Exit
1 Press
. To return to the main menu, press
several times.
2 Press
or and select AUDIO.
3 Press
or and select AUDIO SELECTION.
4 Press
.
5 Press
or to select the desired setting.
6 Press
to save the settings.
1 Press
. To return to the main menu, press
several times.
2 Press
or and select TIMER.
3 Press
or and select CLOCK.
4 Press
.
5 Press
or and select AM for times between
0:00 hours and 12:00 hours or PM for the times
between 12:00 hours and 24:00 hours.
6 Enter the time using the key pad.
7 Press
to save the settings.