Still Picture; Show Time; Set Sleep Time; Set Picture Mode While Watching - Baumann Meyer DT2620D Operating Instruction

Still Picture

Use this function to hold the picture.
1
Press .
During the display of the still picture the sound will continue to play.
2
Press again to continue watching.

Show Time

Use this function to display the time. If teletext is displayed, the time will not be shown.
1
Press .
2
Press again to hide the time.

Set Sleep Time

Use this function to set after how many minutes the unit will switch off.
1
Press until the desired number of minutes is displayed.

Set Picture Mode while Watching.

Use this function to adjust the picture optimally to the content.
1
Press until the desired mode is displayed.
For further information on the settings refer to: "Set Picture Mode" on page 26.

Adjust Picture Size while Watching

Use this function to set the picture size.
1
Press until the desired size is displayed.
For further information on the settings refer to: "Set Aspect Ratio" on page 25.
Watching
49